5 Cast Elements – Ring Series

Part of the course brief was to cast 5 of the same element and make some jewellery with them. This could be 5 in 1 making a bracelet or pendant, or could be a few different individual pieces. I decided to create a series of 5 rings using my cast faceted element. Below are some sketches of the ideas I had.

I designed the faceted pod in CAD and then 3D printed this at home, working out the exact size I was after. Although the CAD program tells you what size the piece is as you’re deigning it, I seem to work way better with the program if I can have the physical copy instead of trying to gauge it with a ruler in my hand and visualising the size. At the time I was experimenting with this, the college 3D printer was broken and I’d already 3D printed a couple of designs from the college printer which I didn’t like. However, using my printer doesn’t give a great finish. It’s perfect for what I need it to do but a lot of clean up is needed before or after if using the piece for casting.

I super glued a brass rod to the plastic piece to create the wax injection chamber then proceeded to make a rubber mould so that I’d be able to cast multiples (as I need 5 identical pieces). I then wax injected the mould which turned out great and sprued up my tree and had it cast.



The castings were in pretty bad shape, purely because of the 3D printed texture on them. However, using a vice and large file, I pinned the facets into the vice one at a time and filed the surfaces flat which made the pieces look miles better. I then began making my series of rings.

I originally wanted to set some flush settings into a couple of the rings with black and yellow 2mm and 2.5mm C.Z’s, however, I’d only done 5 of these previously and didn’t feel confident doing this without a backup ring in place. Also with time running out, I decided to leave this idea for now but may revisit it later down the line. My other thoughts were to oxidise areas and keum boo others. I’m not a fan of keum boo though so felt this was taking me down a style that didn’t fit my own. My final idea was to set pops of resin to the rings but I didn’t want to rush this with the exhibition approaching and decided for the sake of time and wanting the rings displayed at the exhibition, I’d give them a polish and leave them clean and simple. I’m happy with the results, I think the rings are a lovely design but would like to add a pop of colour later on.

I also granulated some silver then filed these to have a faceted appearance. I soldered these to a couple of the ring shanks. The ring shanks and stems were all given a hammered texture finish also using a ball pein hammer. Below is a little video of 4 of the completed rings in action.