Brooch Project – Part 3

I’ve been playing around with samples. Below are some of the techniques I’ve been using. The main brooch frame is sterling silver which I have partly oxidised. I have created a domed top using copper which I have pierced out a geometric shape from. I reticulated pieces of silver on top of the copper and then domed it. I’ve used this top to place over the final samples.

Enamel

Here, I have created enamelled panels which can be swapped out for different colours or patterns.

 

Score and Fold, Reticulation & Textures

Here, I have used the disc cutter to create the base circle. I used a ball pein hammer to create the texture before cutting out the circle (so not to distort the circular shape) then domed it to fit the brooch frame. I then cut out a square pattern from copper. I placed pieces of silver on top and melted them creating this reticulated effect. I then scored and folded them in different directions and soldered to the copper dome.

 

Stone Setting

Below I have set an unusually shaped, synthetic stone. I cut out the base circle using the disc cutter and copper, I then flooded some silver solder on top to give me an idea of how it all would look together in silver, although, I was also contemplating oxidising the base black. I cut some 3mm copper wire and sawed it into 3 equal lengths. I soldered these to the base disc assessing the distance between the 3 pillars by eye and using the stone to gauge how close they should be to hold the stone in place. This was surprisingly pretty easy. I used a triangle needle file to saw into the wires (all at an equal height), just enough to pop the stone into place. Using my flat nose pliers, I pulled back one of the prongs slightly to insert the stone into the grooves and then moved the prong back into place. The stone is nice and secure.

final 10

Score & Fold, Oxidising and Resin

I again, used the disc cutter to create the base of the brooch. I cut away a geometric shape to add detail to the back and also to allow the wearer to look through all the layers. I then pierced out a square pattern I’d created with a geometric shape attached. I used the score and fold method to bend these squares into the desired shape and soldered it to the circular base. I oxidised the inside of the square forms and then added a layer of resin which I gave a yellow pigment to onto the geometric shape.

 

Blog on final piece to follow.

Stevie

Advertisements

Brooch Project – Part 2

I’ve had a few ideas for the brooch project and some of those ideas are pulling me away from my normal materials which I like. As part of the assessment I need 4 Manufacturing Technique samples so I’ve been considering a handful:

  • Reticulation
  • Keum Boo
  • Enamel
  • Stone Setting
  • Adding Cast Elements
  • Patinas – with platinol, liver of sulfur and ammonia
  • Roll Printing
  • Concrete

Although I’ve done a few samples with brightly coloured enamels, this brooch is particularly aimed at men so I feel using neutral tones and earthy materials would be the best way to entice a man to wear it. Below are a few ideas I had at a random moment when I had no sketchbook!

sketch1

~ The first sketch I was thinking about doming copper. I also wanted to add chips of silver to reticulate on top, leaving an interesting texture on top. I am considering oxidising over the reticualtion using platinol and brushing it all little so that the colour has a worn grey effect. I also wanted to add a strip of keum boo down one side to add a touch of colour and class.

~ The second sketch was a quick and random idea. Pierce out the shapes, dome it and enamel it. Nothing exciting and not something I really like, it was just a quick fire idea.

sketch2

~ Above, I was looking at 2 pieces as one. The top layer would have a geometric shape cut out, it would all be reticulated silver for a nice texture and I would also dome it. The second part would be a flat disc that is secured underneath by the top piece. It would be enamelled dark or oxidised grey. I would create a geometric ‘cup’ that would be filled with a pigmented resin, perhaps a yellow to compliment the grey? Also, I feel yellow is not too bold a colour for a man to try out! I was also considering adding some goldleaf flakes. If that were the case however, yellow would not be the main colour in the cup.

sketch3

~One flat layer. Oxidised disc with a worn grey effect. Solder on a geometric ‘cup’ and fill with cement, securing a tube setting with a stone in place as the cement is drying. The dark, oxidised base, with a pale grey cement and just a little sparkle from a stone I think would look great.

 

Samples to follow soon!

Stevie

Graded Unit – Development

I began tracing shapes I found in the pictures I’d taken in order to transcend my research into a tangible object. (Example below). I managed to find some very interesting shapes in pictures of rock formations and mountain scenes from both my travels to Fuerteventura and Iceland. This is how I began finding potential shapes which I would then layer, rotate and resize, developing these into potential jewellery pieces. I had potential pendant, earring and brooch designs, however, I was mostly drawn to potential brooches.

1

I used the shapes I traced to create a frame for the piece, a good base to build on. I also wanted to add the square forms I’ve been using throughout my work this year so created different square combinations and sizes and layering these over the frame. It was easier to create a final design knowing the specific elements I wanted to include into the final design which was my cube cast element and these square forms. I decided to adapt and build on where I left off with the ‘Sense of Place’ brief.

2124

I used CAD to help bring the frames to life and determine which shapes I most preferred. As for colour, I was torn between grey and yellow. I also looked into using purples being my favourite colour, however, not having had the chance to use it in my current body of work I wasn’t confident in changing this up at this point in the year. I was pulled more towards yellow, as I was using silver and I feel the grey would have blended too much when I was wanting to create a ‘pop’. Therefore, yellow was my colour of choice. I also thought about using keum boo through the development stage, however, I felt this would not mix well with resin. It would be one technique or the other and resin is something I like to add to my work regularly, whereas keum boo I may not visit again anytime soon.

I created copper samples to help determine which of my favourite designs would work well and which to scrap. Some designs look great on paper but do not add up when created so this was a vital step in deciding on what the final piece would look like and how it would be put together.

 

Final design choice to follow.

Stevie.

Graded Unit – Research

The Graded Unit brief is titled ‘InForm‘ and this has been left open to interpretation. After doing research into topics I am passionate about during the Planning stage and then meeting with my lecturer and having a talk, I decided to stick with what I know and enjoy, rather than beginning a whole new topic. I have chosen to ‘inform’ others of my inspirations and show how I take what inspires me and transform it into a tangible, wearable object.

My inspiration, particularly over the last year, has been inspired by natural forms and textures; rock formations, cloud structures and the shapes and patterns they naturally create. I like to exaggerate the shapes I find in these forms, creating sharp, angular, geometric designs.

Below are some images I’ve taken on my recent travels to Fuerteventura and Iceland which had me truly inspired, creating the beginnings of what will be my final piece for InForm. I found interesting textures among the lava cliffs in Fuerteventura and intriguing shapes in the rock formations and mountain views in Iceland.

Views/Mountains/Scenic Views

This slideshow requires JavaScript.

Rocks/Patterns/Textures

This slideshow requires JavaScript.

This is the foundation of my research. More to come in Development.

Stevie

Brooch Project – Part 1

I am making a brooch (for MEN!) as part of the Manufacturing Techniques brief. I need to experiment with at least 4 different techniques and the final piece should include 2.

My lecturer made a brooch frame and then had is cast multiple times and handed these out to everyone in class with the aim of this Man Brooch project frame to have interchangeable inserts. I absolutely love this idea and have seen jewellers’ do this with their own jewellery in many different ways in the past and it is something I’d love to try myself at some point with my own, personal line of work. So this is a great way to get some practise in. Thankfully the cast frame has been made to fit a circular disc which can be cut from the disc cutter in class, making the ‘interchangeable‘ part much easier.

Below are a few experiments and samples of ideas. I’m still however, working on the ‘manly’ part, although I love the idea of men stepping outside their comfort zone and wearing something outside of the ‘stereotypical norm’.

Reticulation
Here I have used the disc cutter to cut out some copper. I placed small chips of scrap silver over the copper and began heating until the silver pieces melted and ran and bubbled over the copper surface, creating a lovely texture. This looks slightly rose gold in colour with the copper shining through the silver. I then domed this slightly to fit neatly into the brooch frame.
I would like to try and place a strip on Keum Boo down the piece, however I am unsure whether the keum boo will adhere to the surface securely with the undertone being copper? I feel it is unfinished though, so if keum boo will not work I’d possibly add a stone using a tube setting, or perhaps a cast element? Currently, the piece reminds me of the moon, unexpected but very happy with it.

1


Cast Elements
I used the disc cuter to cut a copper circle and then again to cut out a smaller circle, slightly off centre. I used the same ‘reticulation’ technique and domed the circle again to fit snugly into the frame. I looked at inserting cast elements that fit nicely inside the domed piece. Here I looked at setting a stone into the centre of the cast element and then popping this reticulated, domed piece on top, ‘framing’ the cast element. (Excuse the blue-tac stain, was still experimenting with placements).

8


Enamel
Using the reticulated and cut out frame, I looked into adding a pop of colour. What better way to do this than with enamel (haha – Not!) I managed to get lucky with the enamel this time after a few attempts on scrap copper. I used a Mustard Yellow, Blue, Mint Green and then mixed two different shades of purple to create a deep Plum colour. The mint green peeled at one side and turned black but I like this effect even though I cannot explain how it happened. These enamelled discs were cut using the slightly smaller circle on the disc cutter with the larger, domed disc holding them nicely in place.

Score & Fold
Using the previously made samples above as a base, I designed and cut out from copper square forms. As it’s just a sample, I reticulated some silver over the surface of the square form to give the illusion of silver. I then used the score and fold method to angle them in different ways. I have been testing out the placement of this form over the domed circle and adding coloured discs underneath.

 

These are just a few samples and ideas and looking at other techniques to sample, such as Keum boo, Patinas and adding texture using hammers and the rolling mill.

Stevie.

 

 

Sense of Place -Final Design Possibilities

Here are my A3 boards of potential final design outcomes.For the first brooch ideas I was looking at layering fold formed square patterns on top of one another to create some depth. I pierced out a lot of copper samples but after a lot of thought, I decided it was just too much silver in one piece for a poor student! I contemplated cutting out a layer in copper and oxidising it or reticulating small pieces of silver on top. I decided against these ideas and continued my development.

brooch1 slides

After further development on the brooch designs, I looked at combining the geometric frames with the square forms. This would save a lot on the amount of sheet silver I’d be using and also brings the two directions I was taking back together. After sampling a few shapes and layering, I found it was all too flat and after more development I created a frame with some extra structure to layer the square forms over. I looked at adding some coloured resin to give the pieces some colour.

brooches2 SOP

I began designing with earrings, looking at square wire frames and how they’d be created. I attempted to design a frame in Rhino and then 3D printed it. I used the model to create a rubber mould which works pretty well but feel maybe the frames are perhaps a bit bigger than I’d like. I then continued development on the earrings concept, looking at casting elements to incorporate and then moved on to the square fold forms once more. After some paper samples to decide on my favourite layout, I attempted a copper sample and was very pleased with the outcome. In the end I decided to incorporate some cast lava rock to the final earring design.

earrings

Final pieces will be in the next post!

Stevie.

Sense of Place – Research & Development Boards

An upload of A3 boards I created in Photoshop displaying my research and development process which of course has lead to my final designs (a new blog will be uploaded for this).

 

The first board is just to show my trail of thought. I was looking at places I had good memories both from childhood and recent years, people, books/movies/music, a personal journey, the feeling I get from a certain place/environment and transferring this into something tangible. And so on.

SLIDE 1 - SOP

This board is just to show that I was taking colour seriously. Having chosen to go with a ‘feeling’ as a sense of place and that place being a state of freedom and escapism, it was important to not only pick colours that reflect my own personality, but colours that relate to triggering those feelings. Within my sketchbook I’ve looked into many colours and what feelings they are supposed to provoke in us and also looked at how they connect to our Chakras, bringing it back to that spiritually free feeling. These are the colours I narrowed my decisions down to and why. Not only are they best suited to me personally, they represent exactly the feelings I was hoping to resonate with.

Slide 4 - SOP

The following slides are my research and development boards. I looked into the travels I’ve taken – New Zealand, Fuerteventura and Iceland. These places have all triggered that incredible feeling and it’s often because I am out in nature and by the sea.

Slide 2 - SOP copy

Slide 3 - SOP

I found a way to translate that feeling into physical  inspiration from these memories by tracing shapes out of the lava rock, the ocean waves, cliff faces, pathways and walls. This is demonstrated in the next few slides, incorporating  sketchbook images into the A3 boards.

Slide 5 - SOP

Slide 6 - SOP

SOP - Slide 8

I went on to sample some of my favourite designs. I looked at some earring designs and thought about adding colour with the use of resin. I looked at possible manufacturing techniques such as creating frames with square wire, or by 3D printing a frame and casting it, or creating a rubber mould for repeat casting. I also looked at other elements I could use within the piece to bring it further to that physical place. I ended up creating a rubber mould using a piece of lava rock I brought back from Iceland. This mould happened to work fantastically and so I continued to push designs further here to try and incorporate this element into at least one of the final pieces.

Slide 7 - SOP

I also looked into brooch designs. I focused mainly on the geometric shapes originally and eventually started to incorporate fold form squares into the frames. Again, looking at square wire and piercing out silver sheet and looking into adding resin again for that pop of colour. These were all looking a little too flat however so developed further to add more structure and depth to the potential finished piece.

SOP - Slide 9

These are the research and development boards. A new blog will have the A3 boards of possible design outcomes.

Stevie.

Sense of Place – Finalising

In the last post I talked about the geometric frame ideas I had and the earring concepts I’d been working on. However, I was loving the square fold forms I’d been working with in the previous brief and have tried to incorporate them now into this brief. As much as I love the designs I’ve had earlier, I feel I need something more.

I’ve started to combine both the geometric frames I’ve been playing around with as well as the square forms from previous block. I’ve come up with some brooch designs, using the geometric shapes as a wire frame and filling the frame and adding depth with the layered, fold-formed squares. I was originally going for squares on squares (as seen in left image below). I loved this effect but it was using up far too much silver. I thought about using copper and oxidising it, or reticulate small pieces of silver over it but I wasn’t too impressed with these ideas. I loved the frame idea but when sampling, I thought it was all a bit too flat.

sketch3sketch1

After more designs and contemplation I decided to add a frame to the structure, creating more depth. Looking at the Fuerteventura rock faces overlooking the sea and their textures and forms has really helped here as the forms I’m creating by folding the squares are giving a nice, visual effect and towering over the frame.

20161108_17491720161106_103130

Further development below, (attempting to draw) some 3D frames to give the square forms more height and depth like the cliff face in the pictures above.

sketch2

I’ve been sampling using the shapes I’ve found by tracing over pictures from Fuerteventura and Iceland, creating frames. I’m liking this idea very much and looking at possible materials.

sample2

I’m thinking 1.5mm square wire for the frame and 0.7mm silver sheet for the squares. I’m looking at connecting the two parts using either solder or rivets. Although the clean up with be very difficult if I solder so I am pretty sure rivets will be the route to go down. I’m also considering adding a little resin to add a pop of colour or perhaps a little stone setting. I’d love to add my cast piece of lava rock which I found in Iceland, so will continue finalising ideas. Almost there now!

Stevie

 

Sense of Place – Further Progression

In order to create some interesting shapes and get the ball rolling, I gathered pictures from my trips (Fuerteventura / Iceland) and began tracing the shapes I’d found within the surfaces of rock, walls and other places. My initial ideas were pretty simple and mostly earring concepts. I also focused mainly on the odd geometric shapes I’d discovered as I prefer these to the squares I’ve been using. Below are a few sketchbook pages of where I took inspiration, how I worked with different shapes and different techniques I was looking into, such as 3D printing, rubber mould making, casting and mixing silver and resin.

slide-6-sop

slide-7-0-sop

As much as I love my earring concepts and will continue playing with these in my personal projects, I decided to challenge myself more. I went back to squares and began layering and forming them, similarly to what I’d done with The Street brief. I wasn’t completely feeling this either however, as I much prefer working with the off-kilter, geometric shapes, so I’m attempting to combine the two after doing some development work and sampling.

Stevie

 

 

 

Sense of Place – Iceland Inspiration

My latest adventure took me to the land of fire and ice, stunning Iceland. This was a surprise gift from my mum and sisters to celebrate a ‘special’ (and terrifying!) birthday. My hotel was situated right in the heart of Reykjavik, with my hotel just across the street from the iconic Music Hall, The Harpa! Needless to say, my 3 days spent here were highly inspiring and I found countless photo opportunities to incorporate into my new brief.

It was easy to get inspired with so much natural beauty surrounding me. My first day was spent exploring the cities sweet cafes and obscure restaurants, followed by a Northern Lights boat tour. The second day I explored the snowy, city gardens and quirky little shops and art studios, followed by the most luxurious experience at the famous Blue Lagoon. We entered the Lagoon around 7:30pm so by this time it was dark and you could see the steam from the warm water rise into the cold air and the stars lit up the sky, looking like a connect the dots puzzle, with Orion’s belt glowing strong and the odd shooting star flying by. The last time I’d seen the sky lit up like this was around 10 years ago in a rural town called Te Akau, in New Zealand. The final day was the most inspiring when my mother and I took the express tour around the Golden Circle. I would have loved to stay longer to truly absorb the beauty but we had a flight to catch that evening and made it back just in time! We stopped to walk between the Eurasian and North American tectonic plates, then moved onto seeing the Geysers in Strokkur, followed by the stunning Selfoss, Glacial Waterfalls with an abundance of snowy landscapes in-between.

Below are some pictures I collected on my trip which has provided inspiration for designs and samples to soon follow – Shapes within an art studio mirror (the artist apparently works on the Game of Thrones set!), the blue lagoon paving, rocky cliff faces and the Harpa music hall windows. Along with the beauty of nature – Geysers and waterfalls. I also love the mix of colours in the picture of the geyser; a pleasant mix of yellow, grey and blue.

This slideshow requires JavaScript.

Whilst exploring Iceland, I found a lot of lava rock which I also found a lot of in Fuerteventura. I decided to bring some home (on both occasions) in an attempt to make my own little souvenirs. However, today I decided to create a rubber mould from a tiny piece I collected from the Reykjavik shore. The lava rock is very porous and honestly I thought the attempt would be a write off but I am very pleasantly surprised by the results and am now designing to potentially incorporate this into my work!

lava

The pieces look a little weird in this picture and I will have to take a higher quality image to show the details better but I love how organic the wax injections look! Further design work to follow shortly. Thank you Iceland for an inspirational escape! I will see you again one day.

Stevie

A little video extra of the glacial waterfalls. (Had we gone just a few days earlier on the Golden Circle tour everything would have been green!)