Brooch Project – Final Piece

For the final brooch choice I picked the score & fold with geometric shape. This piece is in-keeping with the work I’ve done over the year and hopefully will appeal to those looking to be more bold with their brooch/pin.

I used piercing, scoring & folding, oxidising, resin and reticulation techniques for this piece. (Below are the samples).

final 13

  • I used the disc cutter to create the base of the brooch. I used 0.7mm sterling silver sheet. I cut away a geometric shape to add detail to the back and also to allow the wearer to look through all the layers. I also pierced out from 0.7mm silver sheet a square pattern I’d created which includes a geometric shape. I used the score and fold method to bend these squares into the desired, box-like shape and soldered it to the circular base. I oxidised the inside of the square forms and then added to the geometric shape a layer of resin which I gave a yellow pigment to.
  • The Top piece was also cut from the disc cutter but a slightly larger circle was used. I cut a disc from copper sheet and then pierced a geometric shape out of the copper disc which I then added small chips of sterling silver to and melted and reticulated the silver onto the surface. I then added solder to the other side and melted that over the copper to cover it. I didn’t use silver ships as I wasn’t wanting the same ‘reticulated’ effect. I then domed the piece. What I love about reticulating silver onto copper is that it works differently to reticulating straight onto silver. I also love the rose hue it creates.
  • Our lecturer had already made the brooch frame which he then made a rubber mould of and cast multiple times so that everyone in class could make an interchangeable brooch. All I had to do to this was give it a little clean up and add some tube so that a steel pin could be inserted. I also oxidised the inside of the frame and the front rim and left the rest with a satin, silver finish.

 

This project is about getting men into jewellery. The brooches will be on display at the college exhibition on June 13th and then at the Elements exhibition later in the year. They will be available to buy will all proceeds going to charity for testicular cancer. As part of the exhibition we were asked to get men to model the brooches so I had my oldest brother and my 8 year old nephew model the brooch.

Stevie.

Advertisements

Brooch Project – Part 2

I’ve had a few ideas for the brooch project and some of those ideas are pulling me away from my normal materials which I like. As part of the assessment I need 4 Manufacturing Technique samples so I’ve been considering a handful:

  • Reticulation
  • Keum Boo
  • Enamel
  • Stone Setting
  • Adding Cast Elements
  • Patinas – with platinol, liver of sulfur and ammonia
  • Roll Printing
  • Concrete

Although I’ve done a few samples with brightly coloured enamels, this brooch is particularly aimed at men so I feel using neutral tones and earthy materials would be the best way to entice a man to wear it. Below are a few ideas I had at a random moment when I had no sketchbook!

sketch1

~ The first sketch I was thinking about doming copper. I also wanted to add chips of silver to reticulate on top, leaving an interesting texture on top. I am considering oxidising over the reticualtion using platinol and brushing it all little so that the colour has a worn grey effect. I also wanted to add a strip of keum boo down one side to add a touch of colour and class.

~ The second sketch was a quick and random idea. Pierce out the shapes, dome it and enamel it. Nothing exciting and not something I really like, it was just a quick fire idea.

sketch2

~ Above, I was looking at 2 pieces as one. The top layer would have a geometric shape cut out, it would all be reticulated silver for a nice texture and I would also dome it. The second part would be a flat disc that is secured underneath by the top piece. It would be enamelled dark or oxidised grey. I would create a geometric ‘cup’ that would be filled with a pigmented resin, perhaps a yellow to compliment the grey? Also, I feel yellow is not too bold a colour for a man to try out! I was also considering adding some goldleaf flakes. If that were the case however, yellow would not be the main colour in the cup.

sketch3

~One flat layer. Oxidised disc with a worn grey effect. Solder on a geometric ‘cup’ and fill with cement, securing a tube setting with a stone in place as the cement is drying. The dark, oxidised base, with a pale grey cement and just a little sparkle from a stone I think would look great.

 

Samples to follow soon!

Stevie

Brooch Project – Part 1

I am making a brooch (for MEN!) as part of the Manufacturing Techniques brief. I need to experiment with at least 4 different techniques and the final piece should include 2.

My lecturer made a brooch frame and then had is cast multiple times and handed these out to everyone in class with the aim of this Man Brooch project frame to have interchangeable inserts. I absolutely love this idea and have seen jewellers’ do this with their own jewellery in many different ways in the past and it is something I’d love to try myself at some point with my own, personal line of work. So this is a great way to get some practise in. Thankfully the cast frame has been made to fit a circular disc which can be cut from the disc cutter in class, making the ‘interchangeable‘ part much easier.

Below are a few experiments and samples of ideas. I’m still however, working on the ‘manly’ part, although I love the idea of men stepping outside their comfort zone and wearing something outside of the ‘stereotypical norm’.

Reticulation
Here I have used the disc cutter to cut out some copper. I placed small chips of scrap silver over the copper and began heating until the silver pieces melted and ran and bubbled over the copper surface, creating a lovely texture. This looks slightly rose gold in colour with the copper shining through the silver. I then domed this slightly to fit neatly into the brooch frame.
I would like to try and place a strip on Keum Boo down the piece, however I am unsure whether the keum boo will adhere to the surface securely with the undertone being copper? I feel it is unfinished though, so if keum boo will not work I’d possibly add a stone using a tube setting, or perhaps a cast element? Currently, the piece reminds me of the moon, unexpected but very happy with it.

1


Cast Elements
I used the disc cuter to cut a copper circle and then again to cut out a smaller circle, slightly off centre. I used the same ‘reticulation’ technique and domed the circle again to fit snugly into the frame. I looked at inserting cast elements that fit nicely inside the domed piece. Here I looked at setting a stone into the centre of the cast element and then popping this reticulated, domed piece on top, ‘framing’ the cast element. (Excuse the blue-tac stain, was still experimenting with placements).

8


Enamel
Using the reticulated and cut out frame, I looked into adding a pop of colour. What better way to do this than with enamel (haha – Not!) I managed to get lucky with the enamel this time after a few attempts on scrap copper. I used a Mustard Yellow, Blue, Mint Green and then mixed two different shades of purple to create a deep Plum colour. The mint green peeled at one side and turned black but I like this effect even though I cannot explain how it happened. These enamelled discs were cut using the slightly smaller circle on the disc cutter with the larger, domed disc holding them nicely in place.

Score & Fold
Using the previously made samples above as a base, I designed and cut out from copper square forms. As it’s just a sample, I reticulated some silver over the surface of the square form to give the illusion of silver. I then used the score and fold method to angle them in different ways. I have been testing out the placement of this form over the domed circle and adding coloured discs underneath.

 

These are just a few samples and ideas and looking at other techniques to sample, such as Keum boo, Patinas and adding texture using hammers and the rolling mill.

Stevie.